On a mini makeover of my family room, I really needed a larger desk for the kids for homework and laptops. The old desk only sat one, so in order to remove some fighting over the spot I built a larger table. This table can seat 3 children if they behave and stay in their area. I would only recommend 2. Hahaha!
If you remember back to the time I made the vanity base, I stated I had left over cedar 4"x4" that I would use for a later project.
Here is that later project and how I used it.
I grabbed 4 2"x4", 1 1"x4" and a hollow core door (24"x80"). Since I already had the 4"x4" posts, this project only cost about $30. However, if you don't want to use 4"x4" pieces you can use 2"x4" doubled (like the inspiration project from Ana White).
Here is the cut list:
Below is how the 2 2"x4" pieces stack with the 1"x4". The bottom 2"x4" is a straight cut, the one on top is mitered on the ends at 45 degrees and the top 1"x4" is cut to length for the inside miter cut.
To put together, screw and nail the 1"x4" to the 4"x4" on both ends and work your way out until you have the last 2"x4" in place. I used 2 screws on each board and rotated the spots to sink into the piece below. I also added nailed to mine to add strength.
Here is how the finished leg looks.
Then you will need to cut a center support to attach the two legs. I used the Kreg to screw into the legs from the center support.
And to add to the support, I included "L" brackets on the legs (top and bottom). It may be over kill, but necessary for my kids.
I used a mixture of products to finish the look. I wanted weathered and rustic, but not brown. I love how the finish turned out.
Here is a better look at the finish.
This is the coolest design for legs for a desktop. I love how it turned out.
Next up for the mini-makeover is a new entertainment center.
Stay tuned! If you aren't following on Facebook, Email, Pinterest, or Twitter - Please join me!!